Details:
This is an Unassembled Build Your Self Kit from FASTTECH for 210mm size mini quadcopter. The Quadcopter Kit Includes:
- 1*Quadcopter Frame Kit:
- Wheelbase: 210mm
- Material: Carbon fiber
- With 4 motor protection covers
- With camera mount: Angle adjustable, support CCD/CMOS cameras
- 4*EMAX MT2204 2300KV Brushless Motors(2CW+2CCW):
- No. of cell: 2-3S
- Framework: 12N14P
- Length: 32.2mm
- Shaft diameter: 3mm
- Diameter: 27.9mm
- 4*HOBBYWING SkyWalker 20A Brushless ESC:
- Output: Continuous 20A, burst 25A up to 10 seconds
- Input voltage: 2-3S LiPo, 5-9 cells Ni-MH
- BEC: 2A/5V linear mode BEC
- Refresh rate of the throttle signal: 50Hz to 432Hz
- Max. speed: 210000rpm for 2 poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM
- 8*5045 Propellers
-
1*SP Racing F3 Acro 6 DOF Flight Controller:
- 36*36mm board with 30.5mm mounting holes
- 8*dedicated PWM outputs; 8*PWM inputs
- 36*I/O connections
- 72MHz clock peed
- 3*Hardware serial ports
- STM32F3 CPU, 72MHz inc FPU
- MPU6050 accelerometer/gyro
- Interface:
- Micro-USB socket
- 2*8-pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
- 8*3-pin though-holes for pin headers for ESC/Servo connections
- 2*4-pin though-holes for pin headers for 2x serial ports
- 1*2-pin though-holes for pin headers for battery voltage
- 1*2-pin though-holes for pin headers for buzzer
- 1*4-pin JST-SH socket for I2C
- 1*4-pin JST-SH socket for SWD debugging
-
Note: The pin headers is solderless
-
Recommended Battery(Not Included): 1100mAh 3S - 1600mAh 4S
-
Classification |
PRODUCT TYPE |
Quadcopter Frame Kits
|
Aesthetic |
COLOR |
Red, Green or Black
|
MATERIAL |
Carbon Fiber
|
Package |
PACKAGE TYPE |
Plain
|
PACKAGE CONTENTS |
1*Quadcopter Frame Kits, 2*CW Motors, 2*CCW Motors, 4*ESCs, 8*Propellers, 1*Flight Controller
|
Dimensionsus | metric
|
DEPTH |
2.36 in
|
HEIGHT |
8.27 in
|
WIDTH |
8.27 in
|
PRODUCT WEIGHT |
19.40 oz
|
|
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device