Installing Alexapure Water Filter The Gravity Version Kind!

Having pure, clean water to drink is one of the most basic household amenities. Considering the high amounts of chlorine levels and harmful bacteria lurking in tap water, it’s always a good decision to keep a water filter in the house.

Bottled water can be over-priced, which makes it an expensive option for most homeowners. Water filters, on the other hand, are budget-friendly, require low upkeep, and eliminate all toxic bacteria. They are a wonderful, one-time investment to ensure that your family members are consuming clean water.

They offer major benefits for homeowners by keeping drinking water clean and fresh for longer. Water filtration systems come in a variety of shapes, sizes, and filter types. However, the best water filter systems are those that work off-grid, requiring no electricity whatsoever.

Such filter systems not only provide water that is better-tasting and better-smelling, but they’re also an incredibly cost-effective and healthier choice. So, if you’ve been exploring your options lately, the Alexapure water filter might just be what you’re looking for.

Offering pristine, sweet-tasting water, this water filtration system is crafted from high-quality stainless steel. Keeping mold and rust at bay, the superior-quality built allows the water filter to enjoy a long service life.

Image result for cardcaptor sakura water card

With an innovative gravity-fed mechanism, the filter pulls and purifies water using the natural forces of gravity. This is why it doesn’t use electricity, eliminating costly energy bills. Here’s everything you need to know about this ground-breaking water filter.

Alexapure Water Filtration System Stand-Out Features

Alexapure is one of the finest water filters to invest in. With a powerful filter capacity that holds up to 5000 gallons of water and uses as many as 4 filters at once, Alexapure certainly outperforms other filters in the market. However, most homeowners love this system because it is low maintenance and super-easy to assemble. Here’s what makes it so special.

Removes up to 99.9999% of 200+ impurities

This water filter is crafted with the amazing ability to eradicate nearly 99.9999% of water impurities, bacteria, chlorine, viruses, fluoride, and cysts. This is great news if you’re tired of expensive bottled water and unclean tap water.

The system can purify water obtained from any source, including lakes, streams, lakes, or wells. Even if you’re using municipal water, the filtration system will diligently clean it.

Stainless steel construction

The Alexapure water filter has been built with durable, stainless steel that will last you for years. It is resistant to corrosion, rust, and mold. The microstructure of the apparatus is incredibly tough, which also makes it resistant to impact and damage. Known for its bright and attractive appearance, stainless steel also offers long-term value for the filter.

Easy to Clean and Maintain

Another brilliant reason to invest in the Alexapure water filter is its low maintenance. Since the stainless filter is resistant to dust, grime, and rust, it’s often the first choice of most homeowners. People who are particular about strict hygiene conditions will love the filter because it’s super-easy to clean. All you need is a soft cloth to dust off the filter chambers now and then.

Easy Assembly

Water filters can be tricky with several complex parts in the assembly. This one, however, has an extremely simple manual with minimal components, which makes it easy to attach the whole apparatus in a few minutes!

Impressive Filter Capacity

Apart from its low maintenance, another great benefit of Alexapure is its colossal filter capacity. You won’t have to keep filling the chambers with water as it can hold up to 5000 gallons of water at one time. Both the raw water and fresh water capacity is 7.5 liters, which is enough to keep you and your family hydrated for the most part of the day. If you feel the need, you can always refill the chambers.

Daily use Extends Filter Life

In most cases, the longer you use a filter, the chances of it developing low water pressure or other issues increase over time. But not with the Alexapure water filter. It is built to last with unique qualities that extend its product life with regular use. You will be able to enjoy fresher, cleaner water with each use.

What’s in the Box

Listed below are all the components you will find inside the Alexapure water filter packaging. Make sure you have everything before you start installing the system.

Alexapure gravity block filter with hybrid ceramic shell

  • Stainless steel upper chamber
  • Stainless steel lower chamber
  • Stainless steel lid
  • Spigot assemble
  • Rubber plugs
  • Knob assembly for the lid
  • Non-slip black rubber base ring
  • Instructions for assembly and use

How to Install the Alexapure Water Filtration System

If you’re new to installation, the process can be tricky. Assembling all the parts correctly and setting up the whole apparatus requires a detailed manual. However, once you get the hang of it, installing water filters will be a breeze.

The good thing about the Alexapure water filter is that it comes with a user-friendly, easy guide and components that aren’t complex at all. The gravity-fed mechanism only makes the installation ten times easier as compared to other water filtration systems. Here’s how you can install this system.

Step 1 Assembling the Chambers

The Alexapure Filtration system has two main chambers – the stainless steel upper and the lower chambers. To assemble the apparatus, you will first have to dismantle the two chambers to insert the water filter. Begin by removing the steel lid from the top.

Simply, detach the upper chamber from the lower one, and clean each part thoroughly. You will notice four holes in the upper chamber where 4 filters shall be inserted.

Step 2: Attaching the spigot.

You will also find different parts for spigot assembly, which is supposed to be inserted in the space provided at the lower chamber. Take out the spigot parts from the pack. Remove the upper chamber and insert the spigot into the hole at the lower bottom of the lower chamber.

Carefully fasten its rear part towards the inside of the lower chamber. Make sure the spigot is tight. You can also try pulling it up and down to check if it’s flexible.

Step 3 – Bring Out the Alexapure Filter

The Alexapure filter is packed in a white-colored secure box. You will find the packed box inside the chambers during the initial unboxing. As mentioned before, you will notice four spaces in the chamber to insert the filter. You may install one to four filters in the chamber. One filter can support up to 5000 gallons of water throughout its lifetime.

Step 4: Unboxing the Alexapure Filter


Now, it’s time to unpack the Alexapure Home filter. You will find the filter carefully placed inside a silver-colored air-locked bag to protect it from moisture. The equipment is further secured in a grey-colored, foam gear that prevents breakage and damage during the shipping process. You will also find a manual informing you about the water filter and its installation.

Step 5: Understanding the Four Filter Holes

The upper chamber has four filter holes where the Alexapure filtration system will be inserted. You can fasten the filter in either of the holes and block the remaining holes with rubber plugs to avoid spillage.

Step 6: Remove One Rubber Plug

 

There are three rubber-tight seals included in the box. Carefully insert all of them in the filter holes and secure them properly. Make sure all the rubber plugs are fastened in the filter holes of the upper chamber. To insert the Alexapure filtration system, carefully remove one rubber plug from the hole.

Step 7: The Filter Space

After removing the plug, you can see that now there is space available for the filter. The filter is supposed to be inserted from the internal side of the chamber. A tiny portion of the filter will stick out from the lower part of the chamber. It will then have to be tightened and secured well.

Step 8: Cut Open the Alexapure Filter Packaging

Now it’s time to cut open the filter packaging and bring out the magic instrument - the Alexapure Certified water filter. The airtight packaging is to ensure that moisture doesn’t gather up within the filter.

You can just tear open this packaging. Make sure you keep a pair of scissors around as it can be very handy. Now cut open the wrapper and slowly pull out the filter. Ensure that you pull it out safely; if you are not careful, it may fall out unexpected. Also the filter will be wet and this is normal. Please note you will have to cycle through one or two times prior before drinking.

Step 9: Voila! A New Water Filter

The Alexapure water filter is smooth, cylindrical-shaped, and black in color. Once pulled out of the package, it’s ready to use. The filter is made up of carbon block core and covered in a silver-infused ceramic shell.

Step 10 Insert the Alexapure Water Filter into the Chamber’s Hole

Now you can take the Alexapure water filter and insert it inside the filter hole from where you removed the rubber plug. The small end of the filter is supposed to go through the hole and come out the other side.

Step 11: Fasten the Rubber Washer outside the Chamber

When inserting the filter, lay the chamber down on the table horizontally. To fasten the filter from the other end, you will require a washer (a rubber ring) to do so. You can tighten the washer around the small end of the filter sticking out of the chamber. This will make sure that the filter is properly fastened and secured.

Step 12 – Alternatively, Place the Rubber Washer inside the Chamber

Instead of fastening the rubber washer after inserting the filter, you can place it inside the chamber. In other words, before inserting the filter through the other end, put on the rubber washer around the small end of the filter, and then place it inside the hole of the chamber. This is an easy and quick way to get the filter started.

Step 13 Tighten the Filter with the Screwing tool fastener

Once the filter has been properly inserted, you can fasten the part of the filter sticking from the bottom of the chamber with the screwing tool that comes in the package.

Step 14 – Place the Upper Chamber over the Lower One

Now that the main work is done, carefully pick up the upper chamber and secure it on top of the lower one. Make sure that it’s attached properly to avoid accidents.

Step 15 You’re Good to Go!

Now that your new filter has been properly installed, it’s time to enjoy clean, tasty water! However, make sure not to overfill both the chambers with water; otherwise, it will lead to spillage. Clean the chambers regularly to avoid any mold or stains.

Always keep a check on the water flow. When the water flow reduces, it means that it is time to change the filter. Ensure that you keep a check and change the filter of your Alexapure when it’s required. This is the easiest way to maintain it.

Cleaning and Care of Your Alexapure Water Filter

Even when the filter requires little to no maintenance, it’s important to take care of it to prolong its service life. Here’s what you can do.

Image result for sunfish

Cleaning the Chambers Regularly

Since both the upper and lower chambers are made of steel, simply clean with a damp cloth once or twice a week. This will ensure that the apparatus remains dust-free and squeaky clean all week. Before your first use, make sure to thoroughly rinse the interior with cool, clean water.

Cleaning the Exterior of the Filters

When untreated water enters the filter, the high mineral content may cause unwanted build-up on the ceramic shells. While this doesn’t affect the filtration process, it’s important to keep the outer surface clean. You can scrub the exterior of the filter with a scour pad and clean water. Make sure not to use any harsh soaps or abrasives.

Changing the Filters

While the gravity block filter works hard to provide fresh, clean, and healthy water for you and your family, make sure to change the filters when needed. If you notice reduced water flow through the filter, then it’s time to change the filter.

You’ve probably realized by now that installing a filter is quite easy. Study the manual carefully and follow the above-mentioned instructions to enjoy clean water right out of the Alexapure filter!

Recommended Picks

Alexapure Complete System

$220.59

Alexapure Filter Extra Replacement

 

$98.00

 

Leave a comment

Please note, comments must be approved before they are published